Lars Thrane LT-3100, Руководство пользователя и инструкция по установке

Страница: 139 / 167

LT-3100 User & Installation Manual Rev. 1.06 Web server
Lars Thrane A/S www.thrane.eu Page 128 of 155
Reset to factory default
The LT-3100 system supports reset to factory default. This reset functionality is only available via the web
server, see Figure 168
. By pressing ‘Reset to factory default’ and acknowledging this reset, the LT -3100
system will configure all settings to default and remove all user data (e.g., Contact List, Call History, SMS,
etc.). The LT-3100 system will reboot once the factory reset has been affected.
NOTE : Using ‘Reset to factory default’ the LT -3100 system will lose all settings configured and user
data will be lost. The system will be operational again once it has rebooted
The default values for display and audio settings are displayed in Table 34 below.
Default Display and Audio settings
Display, Mode Day time
Display, Brightness 70%
Speaker volume 80%
Handset volume 60%
Ringer volume 80%
Key Beep volume 40%
Table 34: Default display and audio settings
Figure 168: Web server (Reset to Factory Default)