Lapis Roll Laminator PL-LR, Руководство пользователя

Страница: 38 / 47

Error messages
Error message Cause
#52 Tag verify
Identification or ID does not
match with the initial version
of the film. Film was
probably exchanged after
restart.
Reinsert previous film or restart
laminator.
Remedy
#53 Tag invalid
Invalid tag information with
initial acquisition of the film.
Use permissible / approved film
material.
#54 RFID ERR=dd
Reader:Communication Error
dd=24 read err
dd=83 write err
Error message from tag reader.
Indicates signal between reader
and tag too weak. Visual
inspection!
#55 RFID CRC
Reader transfer error.
Contact problems between
board and tag reader
Check connection cable (service)
#56 RFID MSG
No response from tag
reader. Tag not seen or not
read.
Use permissible / approved film
material.
#61 card inside
Document located in the
transport tray after restart or
after and could not be
ejected
Remove document from the
transport tray manually.
CLEAR
#62 eject
Ejection of the document
failed.
Remove document from the
transport tray manually.
#63 transport
Transport of the document
failed.
Remove document from the
transport tray manually.
#64 retract
Intake of the document
failed.
Remove document from the
transport tray manually.
#65 ribbon end
Film end
Insert new film
#66 ribbon synch
Synchronisation of the film
failed.
- Insert film with index marks
- Insert film correctly
- Configure correct film type
38
6