Lapis Roll Laminator PL-LR, Руководство пользователя

Страница: 29 / 47

Reset
Befehl: <ESC>!!<CR>
Der Laminator wird neu resetiert. Der Vorgang entspricht einem Neustart nach
Power On. Nicht im Makro gespeicherte Einstellungen gehen verloren.
Reset
Befehl: <ESC>!!<CR>
Der Laminator wird neu resetiert. Der Vorgang entspricht einem Neustart nach
Power On. Nicht im Makro gespeicherte Einstellungen gehen verloren.
Menu: SETUP / Uref Step HP(mV)
Indicates the motor current for the passport transport during lamination. It is
optimally set in the factory and does not require adjustment.
In order to carry out a test it is possible to start the motor via .
Setting range:
0...2000...5000 mV
Menu: SETUP / Uref DC re-c(mV)
Indicates the motor current for the DC film re-winder. It is optimally set in the
factory and does not require adjustment.
In order to carry out a test it is possible to start the motor via .
Setting range:
0...2500...5000 mV
Menu: SETUP / Uref DC de-c(mV)
Indicates the motor current for the DC film de-winder. It is optimally set in the
factory and does not require adjustment.
In order to carry out a test it is possible to start the motor via .
Setting range:
0...2500...5000 mV
Menu: SETUP / Standby Option
Set the standby property, if it is activated.
Setting range:
130 oC
Heating off
29
4
Menu: SETUP / Uref Step FP(mV)
Indicates the motor current for the passport transport. It is optimally set in the
factory and does not require adjustment.
In order to carry out a test it is possible to start the motor via
Setting range:
0...2500...5000 mV