Lapis Roll Laminator PL-LR, Руководство пользователя

Страница: 33 / 47

Reset
Befehl: <ESC>!!<CR>
Der Laminator wird neu resetiert. Der Vorgang entspricht einem Neustart nach
Power On. Nicht im Makro gespeicherte Einstellungen gehen verloren.
Reset
Befehl: <ESC>!!<CR>
Der Laminator wird neu resetiert. Der Vorgang entspricht einem Neustart nach
Power On. Nicht im Makro gespeicherte Einstellungen gehen verloren.
System
Function: Clear Error
Startmenu:
Command:
<ESC>!c<CR>
Deletes error messages, refer also to the "trouble-shooting" chapter.
CLEAR
Function: Read Programm-Version
Startmenu:
Command:
<ESC>!v<CR>
Reads the firmware version. Is shown in line 1 on the display.
As a response following a command transfer the user receives a sequence in the
form e.g. "LAMI-S20/V3.30<CR>
F1
Function: Read Serial Number (Board)
Command: <ESC>y8a<CR>
Reads the serial number of board.
As a response following a command transfer the user receives a sequence in the
form e.g. "PL13091570B06RL<CR
Function: Read Serial Number (Device)
Startmenu:
Command:
<ESC>y8b<CR>
Reads the serial number of device. Is shown in line 2 on the display.
As a response following a command transfer the user receives a sequence in the
form e.g. "PL13091570M02RL<CR>
F1
Function: Tag-Info
Command: <ESC>y5<CR>
Reads the 8-digit tag information.
As a response following a command transfer the user receives a sequence in the
form e.g. "12345678<CR>
33
4