Lapis Roll Laminator PL-LR, Руководство пользователя

Страница: 32 / 47

Reset
Befehl: <ESC>!!<CR>
Der Laminator wird neu resetiert. Der Vorgang entspricht einem Neustart nach
Power On. Nicht im Makro gespeicherte Einstellungen gehen verloren.
Reset
Befehl: <ESC>!!<CR>
Der Laminator wird neu resetiert. Der Vorgang entspricht einem Neustart nach
Power On. Nicht im Makro gespeicherte Einstellungen gehen verloren.
Menu: TEST / DC re-coiler
Test of the DC film winder.
The The film winder rotates forwards, so that the film is wound on.
The film winder rotates backwards, so that the film is wound off.
Menu: TEST / DC re-coiler
Test of the DC film unwinder:
The film unwinder rotates forwards, so that the film is wound off.
The film unwinder rotates backwards, so that the film is wound on.
Menu: TEST / DC heatroller
Test of the DC motor for the heated roller eccentric:
The eccentric rotates forwards
The eccentric rotates backwards
The eccentric assumes the 2 end positions alternately. In doing so
the heated roller switches to the lower and upper position.
Menu: TEST / Solenoid
Test of the electromagnets:
The rocker is lowered
The separator is actuated
Menu: TEST / RFID-Trigger
Test of the RDK1 module:
RDK1 mode: read always
RDK1 mode: read by trigger
Test
32
4