Lantronix WiPort NR Скачать руководство пользователя страница 44

Страница: 44 / 72

5: Configuration via Serial Mode or Telnet Port

WiPort® NR Embedded Device Server User Guide



The character string

ATH

is received, terminated with a carriage return. The unit

responds affirmatively according to the selected echo/response mode and drops

the network connection. The serial interface reverts to accepting command

strings.

If this sequence is not followed, the unit remains in data transfer mode.

Table 5-11. Modem Mode Commands

Modem Mode

Command

Function

ATDTx.x.x.x,pppp or

ATDTx.x.x.x/pppp

Makes a connection to an IP address (x.x.x.x) and a remote port

number (pppp).

ATDTx.x.x.x

Makes a connection to an IP address (x.x.x.x) and the remote port

number defined within the unit.

ATD0.0.0.0

Forces the unit into Monitor Mode. Uses remote IP address and

port settings to initiate a connection.

ATD or ATDT

Forces the unit into Monitor Mode. Uses remote IP address and

port settings to initiate a connection.

ATDx.x.x.x

Makes a connection to an IP address (x.x.x.x) and the remote port

number defined within the unit.

ATH

Hangs up the connection (Entered as +++ ATH ).

ATS0=n

Enables or disables connections from the network going to the

serial port.
n=0 disables the ability to make a connection from the network to

the serial port.
n=1-9 enables the ability to make a connection from the network

to the serial port.

n>9 is invalid.

ATEn

Enables or disables character echo and responses.
n=0 disables character echo and responses.
n=1 enables character echo and responses.

ATVn

Enables numeric response or full verbose.
n=0 enables numeric response.
n=1 enables full verbose.

Note:

The unit recognizes these AT commands as single commands such as

ATE0 or ATV1; it does not recognize compound commands such as ATE0V.

Send the Escape

Sequence

(+++) in Modem Mode

Send ‘+++’ in Modem Mode (Y) ? _

Disable or enable the WiPort NR embedded device server’s ability to send the

escape sequence. The default is

(Yes) (send the escape sequence).

Содержание WiPort NR









































































Результаты поиска

Содержание WiPort NR

Отзывы:

Lantronix WiPort NR, Руководство пользователя, Страница: 44 / 72

Результаты поиска

Содержание WiPort NR

Отзывы: