4: Configuration Using Web Manager
WiPort® NR Embedded Device Server User Guide
24
Password
If Password Required was set to
Yes
, enter the password for
passive connections.
Modem Escape
Sequence Pass Through
Click Yes to enable pass through or No to disable. The default
setting is Yes.
Connect Mode: Active Connection
Active Connect
Select
None
to disable
Active Connect
. Otherwise, indicate
the connection type from the drop-down list:
With Any Character:
Attempts to connect when any
character is received from the serial port.
With Active Mdm Ctrl In:
Accepts external connection
requests only when the
modem_control_in
input is asserted.
With Start Character:
Attempts to connect when it receives a
specific start character from the serial port. The default start
character is carriage return.
Manual Connection:
Attempts to connect when directed by a
command string received from the serial port.
Auto Start:
Automatically connects to the remote IP address
and port after booting up.
Start Character
If Active Connect is set to
With Start Character
, enter the
start character in this field.
Modem Mode
Indicates the on-screen response type when in Modem Mode
(if
Modem Mode
is enabled).
Show IP After RING
Indicates whether to display the remote IP address upon
connection. The default setting is Yes.
Endpoint Configuration
Local Port
Enter the local port number.
Auto increment for
active connect
Select to auto-increment the local port number for new
outgoing connections. The range of auto-incremented port
numbers is 50,000 to 59,999 and loops back to the beginning
when the maximum range is reached.
Remote Port
Enter the remote port number.
Remote Host
Enter the IP address of the remote device.
Common Options
Telnet Com Port Cntrl
This field is available for configuration only when Active
Connection is set to
None
. Select
Enable
to permit Telnet
communication to the WiPort NR unit.
Terminal Name
This field is available for configuration only when Telnet Mode
is set to
Enable
.
Use the terminal name for the Telnet terminal type. Enter only
one name. When this option is enabled, the unit also reacts to
the EOR (end of record) and binary options, which can be
used for applications such as terminal emulation to IBM hosts.
Connect Response
A single character is transmitted to the serial port when there
is a change in connection state. Default setting is
None
.