Lantronix SCSxx05, Руководство пользователя

Страница: 99 / 141

SCSxx05/SCSxx20 User Guide 8: Commands
8-12
User Commands
After the user logs in to the system, the user name becomes the command
prompt. For example,
ross> displays after Ross logs in.
Users log in to identify themselves to the system and to access the device ports
to which the system administrator has assigned them privileges.
select
Use select <port name or number> to select a port (only applies to ports for
which this user is allowed clear , direct , or listen access).
direct
Use direct <port name or number> to connect to a port (only applies to a port
for which this user is allowed direct access).
telnetconfig
Use telnetconfig < port name or number> or telnetconfig <IP address> to
assign a unique TCP port or IP address to a device port so that Telnet can be
used to connect to the device port. Only the sysadmin user has permission to run
telnetconfig . Users who wish to Telnet to a device port must have must have
direct access rights to use this command.
listen
Use listen <port name or number> to listen to a port (only applies to ports for
which this user is allowed listen access).
clear
Use clear <port name or number> to clear the buffer of a device port (only
applies to ports for which this user is allowed clear access).
exit
Use exit to disconnect from a port that you are connected to. When you are
disconnected, the command line displays.
logout
The user can log out of a port connection by typing logout on the command line.
Break Sequence
The user can send a break signal to the external device using a programmed
break sequence. The preset value for this option is
Esc+B (performed quickly but
not simultaneously).
Escape Sequence
The user can disconnect from a port by using a programmed escape sequence.
The preset value for this option is
Esc+A (performed quickly but not
simultaneously).