Lantronix SCSxx05, Руководство пользователя

Страница: 49 / 141

SCSxx05/SCSxx20 User Guide 4: Configuration
4-9
Configuring Services
With this menu option, you enable or disable the following:
‹
Syslog (system logging) (default is enabled)
‹
System logins using SSH (default is disabled)
‹
System logins using Telnet (default is enabled)
‹
Simple Network Management Protocol (SNMP Agent) (default is
disabled)
1. With Configure Services selected, press Enter. The syslog prompt displays.
2. Select Yes to enable or No (default) to disable syslog, and press Enter . The
SSH logins prompt displays.
3. Select Yes to enable or No (default) to disable SSH logins. Most system
administrators enable SSH logins, which are the preferred method of
accessing the system.
Note:
If you enable SSH logins, the initial reboot process may take
several minutes while the SCS regenerates SSH keys.
Enable ssh Logins?
Do you want to enable system logins via ssh?
This is the recommended method of login because of its
security.
Yes / No
4. Press Enter. The Telnet logins prompt displays.
For Telnet logins, the default setting is Yes (to allow simple Telnet
connections into the SCS even during its initial configuration). You may
choose to disable Telnet access for security reasons, especially if you intend
to use SSH.
5. Select Yes (default) to enable or No to disable Telnet logins, and press
Enter . The enable SNMP Agent prompt displays.
6. Select Yes to enable or No (default) to disable SNMP agent.
Enable SNMP Agent?
Do you want to enable the Simple Network Management
Protocol Agent?
This will allow reading status and statistics via SNMP.
This is a read-onlyl SNMP agent.
Yes / No
7. Press Enter . The setup menu returns with Web Configuration selected.