Lantronix SCSxx05, Руководство пользователя

Страница: 40 / 141

SCSxx05/SCSxx20 User Guide 3: Quick Start
3-4
Method # 2- Using Telnet
You can use Telnet to connect to the SCS instead of using the terminal port if
your workstation is configured to communicate with the default network settings
of the SCS. The default IP address of the SCS is 10.0.0.1 with a subnet mask of
255.0.0.0. If you temporarily change your workstation to an IP address of
10.X.X.X with a subnet mask of 255.0.0.0, you can Telnet to the SCS using the
following commands:
1. To access the SCS, on the command line type telnet 10.0.0.1 and press
Enter . You should be at the login prompt at this point.
2. Log in using sysadmin as the user name and the default password, PASS .
3. Continue entering settings using the setup command. (See Configuration. )