Lantronix PremierWave XN Скачать руководство пользователя

Страница: 52 / 143

6: Network Settings

PremierWave® XN Intelligent Gateway User Guide

Table 6-13 Creating, Deleting or Enabling WLAN Profiles

Table 6-14 WLAN Profile Basic Settings

To Configure WLAN Profile Basic Settings

Using Web Manager



To view or edit an existing WLAN profile or to create a new profile, click

WLAN Profiles

on the

menu and select an existing profile.

WLAN Profile Basic Settings

Description

Delete

(checkbox)

Click the

Delete

checkbox beside the profile(s) to be deleted. Three

buttons will appear:



Click the

Submit

button to permanently delete profile(s).



Click the

Apply

button to delete the profile for testing purposes. If the

device reboots, this change will not be applied.



Click the

Cancel

button to cancel this action, as desired.

Enabled

(checkbox)

Click the

Enabled

checkbox beside the profile(s) to be enabled. Three

buttons will appear:



Click the

Submit

button to permanently enable profile(s).



Click the

Apply

button to enable the profile for testing purposes. If the

device reboots, this change will not be applied.



Click the

Cancel

button to cancel this action, as desired.

View or Edit

(link to specific profile)

Click on a specific WLAN Profile name to edit the WLAN profile basic
settings (see

Table 6-14

Create new profile

Type in the name of the new profile to be created into the

Create new

profile

field. Then, click the

Submit

button which appears to create the

profile. Once created, the profile name may be clicked so you may edit
profile settings (see

Table 6-14

WLAN Profile Basic Settings

Description

Network Name (SSID)

Specify the name of the wireless network (SSID.)

Warning:

Creating a new profile with a pre-existing network

name will cause the original network name and associated profile
to be overwritten.

State

Select to

Enable

Disable

Topology

Specify Infrastructure (ESS) or Adhoc (IBSS) mode.



Infrastructure

: mode that communicates with access points.



Adhoc

: mode that communicates with other clients, limited to four

connections.

Channel

Specify the channel for an Adhoc network.

Note:

This setting only applies to the creation of an Adhoc network.

Radio Mode

Select the radio mode for the WLAN profile.

Scan DFS Channels

Select to

Enable

Disable

scanning on the DFS (Dynamic Frequency

Selection) channels in the 5 GHz band.

Note:

This setting only applies if scanning in the 5 GHz band is enabled.

Содержание PremierWave XN
















































































































































Результаты поиска

Содержание PremierWave XN

Отзывы:

Похожие инструкции для PremierWave XN

Бренды по названию

Популярные бренды

Lantronix PremierWave XN, Руководство пользователя

Результаты поиска

Содержание PremierWave XN

Отзывы:

Похожие инструкции для PremierWave XN

Бренды по названию

Популярные бренды