PremierWave® XN Intelligent Gateway User Guide
103
11: Management Interface Settings
Command Line Interface Settings
The Command Line Interface settings allow you to control how users connect to and interact with
the command line of the PremierWave XN intelligent gateway. It is possible to configure access
via the Telnet and SSH protocols, in addition to general CLI options.
Basic CLI Settings
The basic CLI settings control general CLI access and usability options.
Table 11-1 CLI Configuration Settings
To View and Configure Basic CLI Settings
Using Web Manager
To view CLI statistics, click
CLI
in the menu and select
Statistics
.
To configure basic CLI settings, click
CLI
in the menu and select
Configuration
.
Using the CLI
To enter CLI command level:
enable -> config -> cli
Using XML
Include in your file:
<configgroup name=”cli”>
Command Line Interface
Configuration Settings
Description
Login Password
Enter the password for the admin account. “PASS” is the default password.
Enable Level Password
Enter the password for access to the Command Mode Enable level. There is
no password by default.
Quit Connect Line
Enter the
Quit Connect Line
string to be used to terminate a Telnet and SSH
session and resume the CLI. Type <control> before the key to be pressed
while holding down the
[Ctrl]
key (example:
<control>L
)
Inactivity Timeout
Set a time period in which the CLI session should disconnect if no data is
received. Enter 0 to disable. Blank the display field to restore the default.
Line Authentication
Select to enable or disable authentication for CLI access on the serial lines.
