- 76 / 79 -
LANGER
EMV-Technik
DE-01728 Bannewitz
[email protected]
www.langer-emv.de
FLS 106 IC set / FLS 106 PCB set
Maintenance
22
The FLS 106 scanner should be cleaned on the outside at regular intervals. We recommend that a
dry, soft cloth be used for this purpose. Use a moist cloth and a neutral cleaning agent to remove
heavier soiling.
Maintenance Intervals
22.1
Activity to be carried out
Frequency of the activity
Perform a visual check of the scanner and its
attachments.
Before each use
Clean the scanner surface with a dust cloth.
Monthly (or more often if necessary)
Clean dirty locations
– particularly the sliding
rails
– with a moist cloth and neutral cleaning
agent.
Only if required
Oil the rails and guides.
Before a longer standstill
Grease the ball screws and slide rail of the Z-
axis via the lubricating nipples.
Every two years
Replacing Labels and Signs
22.2
The marks, labels and safety signs have been permanently affixed to the scanner. They must be
replaced if they work loose or are no longer legible due to external influences.
Please contact Langer EMV-Technik GmbH in this case (chapter 24).
