Langer FLS 106 IC, Руководство пользователя

Страница: 38 / 79

- 38 / 79 -
LANGER
EMV-Technik
DE-01728 Bannewitz
mail@langer-emv.de
www.langer-emv.de
FLS 106 IC set / FLS 106 PCB set
Removing the Transport Protection from the Guide Rails 12.3
Langer EMV-Technik GmbH applies a thin layer of grease to all sliding rails so as to ensure
appropriate corrosion protection during transport and storage. Remove this grease before putting
the system into service.
Figure 36: Cleaning the greased sliding rails with a paper towel
Use dry towels made of cloth or fabric to remove the grease. Dispose of the towels under due
consideration of the local, official regulations.
Prevent the grease from coming into contact with your clothes, skin, hair and eyes.
Wash the grease off with water and soap if it comes into contact with your skin.
Information on the Pre-Installed Components' Torque 12.4
All components for which a special tightening torque is defined have already been installed and
tightened.
The screws of all attachments that have to be installed later should only be fastened hand-tight. No
torque wrench is needed for this purpose.