- 7 / 79 -
LANGER
EMV-Technik
DE-01728 Bannewitz
[email protected]
www.langer-emv.de
FLS 106 IC set / FLS 106 PCB set
General Remarks
2
User Manual
2.1
This user manual enables the safe and efficient use of the FLS 106 scanner. It must be kept with
the scanner so that it is accessible for the user.
Reading and Understanding the User Manual
2.2
Read the user manual carefully, observe the safety information (section 5.3) and follow the
instructions given in this manual before putting the device into service.
Local Safety and Accident Prevention Regulations
2.3
The local accident prevention and general safety regulations also apply to ensure that the FLS 106
scanner is used for its intended purpose.
Images
2.4
Figures have been included in this user manual to assist the reader's understanding but may differ
from the device's actual version.
Limitation of Liability
2.5
In the following cases, Langer EMV-Technik GmbH can assume no liability for damage to property
and personal injury if:
-
The information given in this user manual has not been observed.
-
The FLS 106 scanner was operated by staff not qualified in the field of EMC.
-
The FLS 106 scanner was subjected to unauthorised modifications or technical changes.
-
The FLS 106 scanner was not used according to its intended purpose.
-
Spare parts or accessories were used that had not been approved by EMV-Technik GmbH.
The actual scope of delivery may deviate from the illustrations and texts in this user manual due to
the customisation of orders or due to technical changes and innovations.
Errors and Omissions
2.6
The information in this manual has been carefully checked and is believed to be accurate;
however, the Langer EMV-Technik GmbH assumes no responsibility for any clerical, typographical,
or proofreading errors, or omissions.
Copyright
2.7
The content of this user manual is protected by copyright law and may only be used in connection
with the FLS 106 scanner. This user manual may not be used for any other purpose without the
prior written approval of Langer EMV-Technik GmbH.
