Landoll 2411, Руководство оператора

Страница: 94 / 116

3-60 F-1130-2304
TABLE OF CONTENTS
Final Assembly
1. Attach a tractor to the implement and charge the lift
system hydraulics as described in
“Hydraulic Lift
System” on page 4-3 .
2. Install the 2 x 16 transport lockouts on both 4-1/2 x 16
cylinders on the center frame.
3. The fold systems must be purged of air and filled with
oil
BEFORE attempting to fold the implement. Air in
the system will allow the wings to fall uncontrollably
and may result in implement damage. Follow
instructions for charging the hydraulic fold system as
described
in “Hydraulic Fold System
2411AFG-2411-07-09” on page 4-4 .
4. Connect lights to the tractor and verify operation.
5. Check tires for proper inflation
6. Level the Weatherproofer from front to rear as
described
in “Leveling (Front-to-Rear)” on
page 4-6 .
7. Inspect the final implement assembly, and verify that
all bolts have been tightened, cotter pins spread, and
that there are no leaking hydraulic connections.
CAUTION
Figure 3-54: 1,200 Foot-Pounds of Torque
8. Rotate each disc gang to verify that each gang rotates
freely. Adjust any scrapers that may have shifted
during shipment or assembly.
9. Lubricate the Weatherproofer at all locations as
described
in “Lubrication Maintenance” on
page 5-2 .
10. Touch up with paint any areas that may have been
scratched during moving, handling, or assembly.
11. Thoroughly read and understand the operating
section before using the Weatherproofer.
Tighten all 1-3/4” nuts to 1,250 foot-pounds of
torque
See Figure 3-54
300
POUNDS
PULL
4 FOOT