Landoll 2411, Руководство оператора

Страница: 75 / 116

3-41
TABLE OF CONTENTS
4. Models 2411AFG-07-09 install ag module mount to
front side of rear tower plate assembly with 1/2 x 6
bolts, 1/2 flat washers and 1/2 lock nuts
See
Figure 3-33 . Attach ag flasher control module to
bottom of ag module mount with 1/4 x 1-1/2 bolts, 1/4
lock nuts.
Figure 3-33: AG Flasher Module Installation
2411AFG-07-09
5. Models 2411AFG-07-09 attach tail light mounts to
back side of rear tower plate assembly using 1/2 x 6
bolts, 1/2 flat washers, 1/2 lock nuts
See Figure 3-34 .
Attach the red ag lamps to tail light mounts using 1/4
x 1-1/2 bolts, 1/4 lock nuts.
Figure 3-34: Red AG Lamp Installation
6. Attach the amber ag lamps to the light bracket
assembly, LT and RT using 1/4 x 1-1/2 bolts, 1/4 lock
nuts
See Figure 3-35 .
Figure 3-35: Amber AG Lamp Installation
7. Connect the 3 pin ends of the rear harness to the red
warning lights. Connect 6 pin to the ag flasher control
module
See Figure 3-36 and 3-37 . See Figure 3-31
for LED harness wire designations. Route both 2
pin ends, of the rear harness through the hose loops
of center frame as shown
See Figure 3-37 Model
2411-06 or See Figure 3-39 Models 2411AFG-07-09.
8. Attach one end of the 132” harness to the 2 pin end of
the rear harness through hose loops of center frame
to LT light bracket assembly, down through hole of
light bracket and through tube, connect to 2 pin amber
ag lamp.
9. Connect the 4 pin end of main harness. Route main
harness through hose loops of center frame, through
hose clamps of hitch to front of machine.
10. Two 34” harnesses are provided if needed for main
harness to reach from ag flasher control module to the
tractor
See Figure 3-36 Model 2411-06 or See
Figure 3-9 Models 2411AFG-07-09, for location.
11. Insure that the harnesses are clear of any moving
parts and secure the harnesses with tie wraps
provided.
12. Install the stor-away holder to hose holder on hitch
with 1/4-20 x 3/4 hex head cap screws and hex lock
nuts
See Figure 3-8 Model 2411-06 or See
Figure 3-9 Models 2411AFG-07-09.
13. Models 2411AFG-07-09 install the manual holder to
the front of the front fold tower plate using 1/4 x 1-1/4
bolts, 1/4 flat washers and 1/4 lock nuts
See
Figure 3-38 .
AG FLASHER
CONTROL MODULE,
1/4 X 1-1/2 BOLTS,
1/4 LOCK NUTS
FRONT
AG MODULE MOUNT,
1/2 X 6 BOLTS, 1/2
FLAT WASHERS,
1/2 LOCK NUTS
RED AG LAMP,
1/4 X 1-1/4 BOLT,
1/4 LOCK NUT
FRONT
TAIL LIGHT MOUNT,
1/2 X 6 BOLTS,
1/2 FLAT WASHERS,
1/2 LOCK NUTS
AMBER AG LAMP,
1/4 X 1-1/2 BOLT,
1/4 LOCK NUT
FRONT
LIGHT BRACKET
ASSEMBLY LT & RT