Landoll 2411, Руководство оператора

Страница: 103 / 116

4-9
TABLE OF CONTENTS
Figure 4-11: SIS 20MPH Decal Rear 2411-06
Figure 4-12: SIS 20MPH Decal Rear 2411AFG-07-09
4. When unhitching from the tractor attach the hook end
of the chain to a free link close to the hitch clevis for
storage. This will keep the hook off the ground,
reducing corrosion and keep the hook functioning
properly.
5. Regularly inspect the safety chain for worn, stretched,
or broken links and ends. Replace the safety chain if
it is damaged or deformed in any way.
6. Check that tires are of proper size, load rating, and
inflated
to manufacture specifications before
transporting. Check wheel lug bolts to insure
tightness.
7. Know the transport heights and widths of the unit
before transporting. Attachments can increase the
transport dimensions of the implement. Use caution
when transporting near bridges and power lines.
WARNING
8. Raise the unit to full transport height.
9. Remove the transport locks from the light bracket
assemblies. Install transport locks on both lift
cylinders. Do not depend solely on implement
hydraulics for transport
See Figure 4-13 .
Figure 4-13: Transport Locks
WARNING
10. Transport during daylight hours whenever possible.
Always use flashing warning lights, except where
such use is prohibited by law. Make sure lights,
reflectors and SMV emblem are clearly visible and
operating. Remove any obstructions such as dirt,
mud, stalks or residue that restricts view before
transporting.
Electrocution can occur without direct contact.
SIS 20MPH DECAL REAR SIS MOUNT
SIS 20MPH DECAL REAR FOLD TOWER PLATE
Failure to use transport lock pins during
transport may result in permanent equipment
damage, serious injury, or death.
TRANSPORT LOCK
STORED POSITION
LIGHT BRACKET
ASSEMBLY
TRANSPORT LOCK
INSTALLED POSITION
L PIN, 1/8 HAIRPIN