manualshive.com logo in svg

Land Pride Post Hole Diggers HD25, Руководство оператора

Поделиться
Скачать
Land Pride Post Hole Diggers HD25 Скачать руководство пользователя страница 36

32

Section 5: Maintenance & Lubrication

HD25 and HD35 Hydraulic Post Hole Diggers 317-076M

7/31/17

Table of Contents

Section 5: Maintenance & Lubrication

General Maintenance Information

Proper servicing and adjustments are key to the long life 
of any implement. With careful inspection and routine 
maintenance, you can avoid costly downtime and repair.

Check all bolts after using the unit for several hours to be 
sure they are tight. Replace any worn, damaged, or 
illegible safety labels by obtaining new labels from your 
Land Pride dealer.

The parts on your Post Hole Digger have been specially 
designed and should only be replaced with genuine 
Land Pride parts. Do not alter the digger in a way which 
will adversely affect its performance.

Safety Information

!

DANGER!

To prevent serious injury or death:  

•

Keep all persons away from rotating auger. Contact with 

rotating parts may cause serious injury or death.

!

WARNING!

To prevent serious injury or death:  

•

Do not allow anyone to perform maintenance on this 

implement who has not been properly trained in its safe 
operation.

•

All guards and shields must be installed and in good 

working condition while operating implement.

•

Always secure equipment with solid supports before 

working under it. Never work under equipment supported 
by concrete blocks or hydraulics. Concrete blocks can 
break, hydraulic lines can burst, and/or hydraulic controls 
can be actuated even when power to hydraulics is off.

•

Always follow “Tractor Shutdown and Storage” or “Skid 

Steer Shutdown and Storage” on page 1 before leaving the 
operator’s seat.

•

Make sure safety labels are installed in their proper 

location and are in good condition before operating the 
attached implement. Read and obey all instructions on the 
labels.

•

Perform scheduled maintenance. Check for loose 

hardware, missing parts, broken parts, structural cracks, 
and high wear. Make repairs before putting implement back 
into service. Serious breakdowns can result in injury or 
death.

•

Do not alter implement or replace parts on the implement 

with other brands. Other brands may not fit properly or 
meet OEM specifications. They can weaken the integrity 
and impair the safety, function, performance, and life of the 
implement. Replace parts only with genuine OEM parts. 

Daily Inspections

1.

Check all bolts after using unit for several hours to be 
sure they are tight. 

2.

After each use, inspect auger for loose, worn, or 
damaged auger teeth, tip, flighting, and gearbox 
output shaft bolts and nuts.

3.

Keep cutting edges sharp. Sharp cutting edges dig 
easier and better.

4.

Check gearbox fluid level periodically. Refer to 

“Gear 

Lube Fluid Level” 

on page 33 for detailed 

instructions.

5.

Replace any worn, damaged, or illegible safety 
labels by obtaining new labels from your Land Pride 
dealer.

Long-Term Storage

Clean, inspect, service, and make necessary repairs to 
the digger when storing it for long periods and when 
storing it at the end of a working season. This will help 
ensure the digger is ready for field use the next time you 
hook-up to it.

1.

Remove any dirt and grease that may have 
accumulated on the digger and moving parts. Scrape 
off compacted dirt and wash surface thoroughly with a 
garden hose. A coating of oil may also be applied to 
the lower auger to minimize oxidation.

2.

Check auger teeth and bolts for wear and replace if 
necessary. See 

“Dual-Angle Teeth” 

on page 20.

3.

Inspect for loose, damaged, broken or worn parts 
and adjust or replace as needed.

4.

Repaint parts where paint is worn or scratched to 
prevent rust. Ask your Land Pride dealer for aerosol 
touch-up paint. Paint is also available in touch-up 
bottles with brush, quarts, and gallon sizes by adding 
TU, QT, or GL to the end of the aerosol part number.

5.

Replace all damaged or missing decals.

6.

Lubricate as noted in 

“Lubrication Points” 

on page 

33.

7.

Store Post Hole Digger on a level surface in a clean, 
dry place. Inside storage will reduce maintenance 
and make for a longer Post Hole Digger life.

8.

Follow all unhooking instructions on pages 14 to15 
when unhooking the Post Hole Digger.

Land Pride Aerosol Touch-up Paint

Part No.

Part Description

821-011C

PAINT LP BEIGE AEROSOL SPRAY CAN

821-070C

PAINT LP BLACK AEROSOL SPRAY CAN

821-066C

PAINT ORANGE AEROSOL SPRAY CAN

Содержание Post Hole Diggers HD25















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды