manualshive.com logo in svg

Land Pride Post Hole Diggers HD25, Руководство оператора

Поделиться
Скачать
Land Pride Post Hole Diggers HD25 Скачать руководство пользователя страница 14

10

Section 1: Assembly & Set-up

HD25 and HD35 Hydraulic Post Hole Diggers 317-076M

7/31/17

Table of Contents

HD Bucket Mount Assembly

Refer to Figure 1-2:

1.

The Bucket Mount Post Hole Digger can be mounted 
on the left-hand or right-hand side of bucket.

2.

Locate mounting bracket (#1) on the bucket sidewall 
where it is most convenient for the operator to view 
the auger.

3.

Using backing plate (#3) as a guide, locate and drill 
(4) 9/16" dia. holes in bucket side wall.

4.

Mount mounting bracket (#1) to bucket sidewall with 
1/2"-13 x 1 3/4" GR5 bolts (#2), backing plate (#3), 
and 1/2" flange nuts (#4) as shown. Tighten nuts to 
the proper torque.

5.

Attach clevis (#5) to mounting bracket (#1) with 
1" x 4 11/16" clevis pin (#6) and cotter pins (#7). Bend 
one or more legs of cotter pin to retain pin. 

6.

Remove one cotter pin (#9) and hanger pin (#8) from 
gearbox (#16). 

7.

Align mounting holes in gearbox (#16) with mounting 
holes in clevis (#5) and reinsert hanger pin (#8). 
Secure hanger pin with cotter pin (#9). Bend one or 
more legs of cotter pin to keep it from falling out.

IMPORTANT: 

If digger is mounted on the left-hand 

side, then hydraulic motor should be rotated 180 
degrees so that hydraulic fittings are facing out.

HD Bucket Mount Assembly (Right-Hand Side Shown)

Figure 1-2

18973

Make sure gearbox is mounted with 
hydraulic motor extending towards the 
rear and motor ports facing out as shown.

8.

Attach extension spring (#10) to clevis (#5) & 
tab (#17) on hydraulic motor (#14).

9.

Attach 90

o

 elbows (#15)  to ports in hydraulic 

motor (#14). Rotate elbows to point straight back as 
shown and tighten.

10. Screw MJIC end of adapter fittings (#13) to one end 

of 292" long hydraulic hoses (#11 & #12) and tighten.

11. Screw quick release couplers (couplers furnished by 

customer) to adapter fittings (#13) until tight.

12. Screw other end of hydraulic hoses (#11 & #12) to 

elbows (#15) until tight.

13. Zip ties (not shown) to be used later during tractor 

hook-up.

14. Fill gearbox with gear lube. Refer to 

“Gear Lube 

Fluid Level” 

on page 33 for detailed instructions.

15. Skip to 

“Auger Assembly” 

on page 16

NOTE:  

Hydraulic hoses (#11 & #12) and adapter 

fittings (#13) are optional and may not be included.

IMPORTANT: 

The gearbox is shipped without gear 

lube and must be filled before operating the digger.

Содержание Post Hole Diggers HD25















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды