manualshive.com logo in svg

Land Pride Post Hole Diggers HD25, Руководство оператора

Поделиться
Скачать
Land Pride Post Hole Diggers HD25 Скачать руководство пользователя страница 33

29

Section 4: Options

7/31/17

HD25 and HD35 Hydraulic Post Hole Diggers 317-076M

Table of Contents

Storage Stand Operation

Refer to Figure 4-17:

!

CAUTION!

Do not disconnect Post Hole Digger from tractor on a steep 
slope. Injury to personnel and implement may result.

1.

Lower auger tip to the ground at the location you plan 
to disconnect the Post Hole Digger from the tractor. 
Set tractor park brakes, turn tractor engine off, and 
remove ignition key before dismounting tractor. 
Always chock tractor wheels for an extra measure of 
safety if you stop on a gentle slope.

2.

Attach storage stand (#7) to cradle (#8). Make 
certain guide slots (#1) at end of storage stand are 
securely positioned over cradle pins (#3). 

3.

Secure stand to cradle with clamping knobs (#2).

4.

Disconnect hydraulic hoses and wrap them around 
the boom to keep fittings out of the dirt. 

5.

Unhook boom from tractor’s top 3-point center link 
hitch holes.

6.

Without starting the tractor, lower yoke hitch pins into 
support angles as follows:

a. Loosen clamping knobs (#4) and adjust angle 

brackets (#5) to align with yoke hitch pins (#6).

b. Tighten clamping knobs (#4).

c. Lowering 3-point arms until yoke hitch pins (#6) 

are supported by angle brackets (#5). 

7.

Remove lower 3-point arms from yoke hitch pins.

8.

Once post hole digger is disconnected and tractor’s 
3-point arms are clear of the digger, drive tractor 
away being careful not to catch on the Post Hole 
Digger and Storage Stand.

NOTE:  

There may be some lowering and lifting of 

the lower 3-point arms to properly position the yoke 
in the storage brackets. Also, the storage brackets 
may need to be raised, lowered, or flipped around to 
properly align with yoke frame. 

Stand Assembly

Figure 4-17

19038

Top 3-Point 

Hitch Hole

Yoke

19039

Содержание Post Hole Diggers HD25















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды