manualshive.com logo in svg

Land Pride Post Hole Diggers HD25, Руководство оператора

Поделиться
Скачать
Land Pride Post Hole Diggers HD25 Скачать руководство пользователя страница 15

11

Section 1: Assembly & Set-up

7/31/17

HD25 and HD35 Hydraulic Post Hole Diggers 317-076M

Table of Contents

Skid/Loader Mount Assembly

Refer to Figure 1-3:

Determine which mount will be used with the skid/loader 
hitch mount (Center Mount “A” or Offset Mount “B”). 
Follow instructions below based on type of mount to be 
used.

Center Mount & Offset Mount

Refer to Figure 1-3:

1.

Attach gearbox rest (#4) to lower center mount 
bracket “A” or to lower offset mount bracket “B” with 
3/8"-16 x 1 1/4" GR5 carriage bolts (#5) and flange 
lock nuts (#6). Tighten lock nuts to the correct torque.

2.

Attach clevis (#2) to upper center mount bracket “A” or 
to upper offset mount bracket “B” with clevis 
pin (#8) and cotter pin (#7). Bend one or more legs of 
cotter pin to keep it from falling out.

3.

Remove one cotter pin (#7) and hanger pin (#9) from 
gearbox (#10). 

4.

Attach gearbox & motor assembly (#10) to clevis (#2) 
with pin (#9) and cotter pin (#7). Bend one or more 
legs of cotter pin to keep pin from falling out.

5.

Attach spring (#3) to tab (#1) and clevis (#2).

6.

Fill gearbox with gear lube. Refer to 

“Gear Lube 

Fluid Level” 

on page 33 for detailed instructions.

7.

Skip to 

“Skid/Loader Hose Assembly” 

on page 12.

IMPORTANT: 

Make sure gearbox is mounted with 

hydraulic motor on the left-hand side and motor 
ports facing the skid/loader mounting plate.

IMPORTANT: 

The gearbox is shipped without gear 

lube and must be filled before operating the digger.

Center Mount & Offset Mount (Center Mount Shown)

Figure 1-3

OFFSET MOUNT

CENTER MOUNT

Make sure gearbox is 
mounted as shown with 
hydraulic motor on this 
side and motor ports 
facing the skid/loader 
hitch mount.

35977

Содержание Post Hole Diggers HD25















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды