manualshive.com logo in svg

Land Pride Post Hole Diggers HD25, Руководство оператора

Поделиться
Скачать
Land Pride Post Hole Diggers HD25 Скачать руководство пользователя страница 16

12

Section 1: Assembly & Set-up

HD25 and HD35 Hydraulic Post Hole Diggers 317-076M

7/31/17

Table of Contents

Skid/Loader Hose Assembly

Determine which mount type the skid/loader hitch mount 
is set-up with and follow instructions below.

Center/Offset Mount for Tractors

Refer to Figure 1-5:

1.

Attach 45

o

 elbows (#9)  to ports in hydraulic 

motor (#4). Rotate elbows to point towards the right 
as shown and tighten.

2.

Screw MJIC end of adapters (#5) to one end of 
hydraulic hoses (#6 & #7) until tight. 

3.

Screw quick release couplers (#8) (couplers 
furnished by customer) to adapter fittings (#5) until 
tight.

4.

Thread other end of hydraulic hoses (#6 & #7) 
through opening (#1) and hose protection ring (#2).

5.

Screw hoses (#6 & #7) to elbows (#9) until tight.

6.

Skip to 

“Hooking Up Skid/Loader Mount”

 on 

page 15.

Center/Offset Mount for Skid Steers

Refer to Figure 1-7:

1.

Attach 45

o

 elbows (#8A & #8B)  to ports “A” & “B” in 

hydraulic motor (#4). Rotate elbows to point towards 
the left as shown and tighten.

2.

Screw MJIC end of 90

o

 elbows (#4) or MJIC end of 

adapters (#5) to one end of hydraulic 
hoses (#9 & #10) until tight. 

3.

Thread other end of hydraulic hoses (#9 & #10) 
through opening (#1). Screw hydraulic hoses to 
elbows (#8A & #8B) until tight.

4.

Select the coupler (male #6 or female #7) that mates 
with high pressure coupler at the skid steer. Attach 
selected coupler to hydraulic hose (#9) and tighten. 
Hose #9 attaches to port “A” on the motor.

5.

Screw remaining coupler to hydraulic hose (#10) until 
tight.

6.

Skip to 

“Hooking Up Skid/Loader Mount”

 on 

page 15.

NOTE:  

Use Hose Stay Kit #S6689 (available 

through Kubota) and 90

o

 elbows (#4) if attaching to 

Kubota CTL.

NOTE:  

Customer to select which fitting best fits 

equipment set-up, 90

o

 elbows (#4) or straight 

adapters (#5).

Center/Offset Hydraulic Hose Set-Up With Tractor Loader

Figure 1-5

Center Hydraulic Hose Set-Up With Skid Steer Loader

Figure 1-7

Hooking Up 3-Point Mount

!

WARNING!

To prevent serious injury or death:  

•

A Crushing Hazard exists while hooking-up and unhooking 

implement. Keep people and animals away while backing-
up to implement or pulling away from implement. Do not 
operate hydraulic 3-point lift controls while a person or 
animal is directly behind the tractor or near the implement.

•

Always set tractor transmission in park or engage park 

brake, shut tractor off and remove switch key before 
allowing anyone including the operator to hook-up and 
unhook implement.

35979

35980

Содержание Post Hole Diggers HD25















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды