Default RS-232 Communication Parameters:
Bits Per Second:
57600
Data Bits:
8
Parity:
None
Stop Bits:
1
Flow Control:
Hardware
13.2 RJ-45 Ethernet Port Integration Parameters
You can use the guide below to design ethernet cables to integrate the
CDM820i into your systems.
Standard RJ-45 Ethernet Pinout:
Pin
Function
Color
----------------------------------------------
1
TX +
White/Orange
2
TX -
Orange/White
3
RX +
White/Green
4
Blue/White
5
White/Blue
6
RX -
Green/White
7
White/Brown
8
Brown/White
Below you will find pinouts of the RJ-45 Ethernet Plug and Jack connectors:
14.0 Quick Reference Guide
Below you will find a
Quick Reference Guide
of the AT commands most commonly used
in day-to-day operation of the modem.
·Entering Access Codes:
To retrieve the Serial Number of the modem (in hexadecimal forma t):
AT+GSN
†
To perform Over-the-Air Service Provisioning (OTASP):
AT+CDV*22899
†
To change to Offline Digital mode:
AT$KWMODE=1
†
To enter the SPC and unlock the modem for programming:
AT$KWSPC=000000
†
To enter the Mobile Identification Number (MIN):
AT$KWDIR=
<MIN>
†
To enter the Mobile Country Code (MCC):
AT$KWMCC=
<3 digit MCC>
†
To enter the Mobile Network Code (MNC):
AT$KWMNC=
<2 digit MNC>
†
To write configuration changes and reset the modem, type:
AT$KWMODE=2
†
·Communication Parameters:
To check the baud rate:
AT+IPR?
To change the baud rate:
AT+IPR=
<baud rate>
(Valid rates: 300, 1200, 2400, 4800, 9600, 14400, 19200, 38400, 57600, 115200 bps)
To change the flow control:
AT+IFC=2,2
†
(The values are: 0: No Flow Control,
