messages at local RS-232 port.
4
Reserved
8
Reserved
16
Reserved
32
Reserved
64
Reserved
128
Reserved
10.2 AT+LCSHWT Show Running Threads
This command will issue a list of all threads currently executing in the modem.
Default:
0
Storage:
NA
Command Values:
AT+LCSHWT
Show all running threads.
10.3 AT+LCSHWM Show Free Memory
This command can be used to show the amount of free buffer RAM on the modem out of
a total of 32K.
Default:
0
Storage:
NA
Command Values:
AT+LCSHWM
Displays free buffer RAM.
10.4 AT+LCPRT Periodic Reset Timer
This command is used to configure the periodic reset timer. The periodic reset timer can
be used to perform a complete modem reboot at the end of a specified period of time.
This reboot is designed to function as closely as possible to removing and reapplying
power to the modem (without actually doing so). This reboot will occur at the specified
interval regardless of any other condition. If the device is in a "call" and the periodic reset
time expires the call will be unexpectedly terminated.
The modem does NOT perform an orderly clear-down of the call from the application
point of view; it does however attempt an orderly shutdown of the digital cellular
module.
The periodic reset timer always starts from the time the modem is powered up or reset,
even if
AT+LCPRT=0
. This means that if the modem has been running for some time
and the user sets AT+LCPRT to a value less than the period of time since the unit was
last reset, the unit will immediately reboot. A value of 0 disables the periodic reset
counter.
Default:
0
Storage:
&W
Command Values:
AT+LCPRT=
<timeout>
Sets periodic reset time in seconds.
