ATI
Report product identity.
6.2 Z Soft Reset And Restore Saved Settings
The "
Z
" command will soft reboot the modem without removing power.
Default:
N/A
Storage:
N/A
Command values:
ATZ
Resets the modem.
6.3 E Command Echo
While in command mode, "
E
" controls the echo of characters received by the modem
from the host.
Default:
E1
Storage:
&W
Command values:
ATE0
Disable echo of incoming characters in command mode.
ATE1
Enable echo of incoming characters in command mode.
6.4 Q Quiet Mode
While in command mode, controls whether the modem will send result codes and
unsolicited responses to the host. This does not suppress the modem from sending
solicited responses.
Default:
Q1
Storage:
&W
Command values:
ATQ0
Send result codes and unsolicited responses.
ATQ1
Do not send result codes and unsolicited responses.
6.5 V Result Code Form
Selects whether the modem sends long form (verbose) or short form (numeric) responses
to the host.
Default:
1
Storage:
&W
Command values:
ATV0
Send short form (numeric) result codes
ATV1
Send long form (verbose) result codes
6.6 H Hang Up
This command instructs the modem to disconnect from the remote device; terminating
any session in progress.
Default:
N/A
