16.2 End Cap Overhead & Profile Views
The next two drawings show the overhead and profile views of the end cap. These
drawings show the mounting feet and the mounting hole diameter of 0.120”.
This profile view of the end cap shows the mounting feet extending beneath the body of the
modem by a distance of 0.040” as indicated by the 1.650” end cap height. The modem case is
only 1.610” high without the end caps attached.
16.3 Mounting Flange Guide
The following depiction illustrates the mounting footprint of the CDM819i/CDM820.
The mounting flange holes located on each end of the modem are indicated by the
intersections of the four lines.
