background image

Installation Guide

Before you begin, locate the ADSL configuration information from your
Internet Service Provider (ISP). Also, if you purchased the DG834G in a
country where a microfilter is not included, you must acquire one.

1

1

Connect the DG834G to the ADSL Line

ADSL signals degrade phone sound quality. Microfilters block such
problems and are required for each phone or fax. There are two types:
one-line microfilters; and two-line microfilters which include a built-in
splitter. Sharing a phone outlet with two devices requires a splitter.

The procedure below illustrates using a
two-line combo microfilter/splitter. You
can accomplish the same result using a 
one-line microfilter with a separate phone
line splitter.

a.

Insert the filter into the phone outlet
and connect the phone to the phone 
connector 

(A)

.

b.  Turn off your computer.

c.  Connect the ADSL port 

(B)

of the DG834G to the ADSL 

connector of the two-line filter.

Note:

Improperly connecting a filter to your DG834G will block

ADSL signals and prevent connecting to the Internet.

d.  Connect the Ethernet cable 

(C)

from a LAN port of your

DG834G to the Ethernet adapter in your computer.

e.  Plug in the router and verify the following:

The power light is lit after applying power to the router.

The ADSL link light is solid green, indicating a link has
been established to the ADSL network.

Phone

DSL

Line

f. 

Now, turn on your computer and verify the following:

The local lights are lit for any connected computers.

If software usually logs you in to the Internet, do not run it.

The Internet Explorer Tools Internet Options Connections page
should be set to “Never dial a connection.”

g.   Install a filter on each phone device that shares the phone line

with your router. 

Note:

Use one-line filters for connecting additional phones.

2

2

Log in to the DG834G

Note:

Your computer needs to be configured for DHCP. For help

with this, see the 

Reference Manual 

or tutorials on the 

54 Mbps

Wireless ADSL Firewall Router Resource CD.

a.   Connect to the router by typing 

http://192.168.0.1

in the address

field of Internet Explorer or Netscape

®

Navigator.  

b.   When prompted, enter 

admin

for the user name and 

password

for the password, both in lower case letters. After logging in, you
will see the menu below. 

If you do not see the menu above, click the 

Setup Wizard

link

on the upper left of the main menu.

54 Mbps Wireless ADSL Firewall Router DG834G

Phone

Phone

DSL

Line

Two-Line Combo 

Microfilter/Splitter

One-Line Microfilter

Splitter

Phone

DSL

Line

54 Mbps Wireless ADSL 
Firewall Router DG834G

B

A

Phone

DSL

Line

54 Mbps Wireless ADSL 
Firewall Router DG834G

C

Отзывы: