background image

18.0 Limited Warranty 

 
Land-Cellular (the Company) warrants that it's product shall be free from defects in materials and 
workmanship for a period of one year from the date of shipment. 
 
Land-Cellular warrants any software sold alone or with any of its products shall be free from 
defects (according to the Company's specification) for a period of sixty (60) days from the date of 
shipment. 
 
During the warranty period, if a customer experiences difficulties and is unable to resolve the 
problem by modem with Company's Technical Support, the Company will issue a Return 
Materials Authorization (RMA) number. Following the receipt of a RMA number, the customer 
is responsible for returning the product to the Company, freight prepaid. Upon verification of the 
warranty, the Company will, at its option, repair or replace the product in question, and return it 
by prepaid freight. This warranty does not cover any work or services at the customer's site. 
 
Any software revisions required hereunder cover supply of distribution media only. The warranty 
does not cover, or include, any installation that may be required.  
 
Company shall have no obligation to make repairs or to cause replacement required through 
normal wear and tear necessitated in whole or in part by catastrophe, fault or negligence of the 
user, improper or unauthorized use of the Product, or use of the Product in such a manner for 
which it was not designed, or by causes external to the Product, such as, but not limited to, 
improper power supplies or failure due to extreme temperatures. 
 
The information, recommendation, description and safety notations in this or other documents 
supplied by Company are based on general industry experience and judgment with respect to such 
hardware and software. This information should not be considered to be all-inclusive or covering 
all contingencies. 
 
In no event will Land-Cellular be responsible to the user in contract, in tort (including 
negligence), strict liability or otherwise for any special, indirect, incidental or consequential 
damage or loss of equipment, plant or power system, cost of capital, loss of profit. 
 
The above represents the entire obligation of the Company and understanding between the 
parties. There are no other understandings, agreements, representations or warranties, express or 
implied, including warranties of merchantability or fitness for a particular purpose. 

Содержание CDM819i












































Отзывы: