![background image](http://html.mh-extra.com/html/lancer/tst/tst_installation-manual_672716011.webp)
11
Scheduled Maintenance
FEATURES OF THE TOUCHSCREEN TOWER
As Needed
• Keep exterior surfaces of dispenser (include drip tray and cup rest) clean using a clean, damp cloth.
Daily
• Remove outer nozzle and rinse well in warm water.
DO NOT
use soap or detergent. This will cause
foaming and off taste in finished product.
• Using a soft cloth and cleaning solution, clean the nozzle injectors. See Cleaning and Sanitizing Nozzle
section on page 13 for reference.
• Remove cup rest and wash in cleaning solution.
• Pour warm cleaning solution into the drip tray and wipe with a clean cloth.
• With a clean cloth and cleaning solution, wipe off all of the unit’s exterior surfaces and splash areas.
DO NOT USE ABRASIVE SOAPS OR STRONG DETERGENTS. DO NOT USE AMMONIA BASED
PRODUCTS WHEN CLEANING THE SCREEN OR SURROUNDING PLASTICS.
• Replace the cup rest and nozzle.
Weekly
• Taste each product for off tastes. If off taste occurs clean and sanitize the unit using the appropriate
procedures outlined in the Cleaning and Sanitizing section of this manual.
Monthly
• Clean and sanitize the unit using the appropriate procedures outlined in the Cleaning and Sanitizing
section of this manual.
Every Six Months
• Clean remote chiller according to manufacturer’s instructions (if necessary).
• Clean the entire exterior of the unit.
The following are the features only available from the manager’s access to the service menu (PIN: 6655, see page 5). For
information on more available features, see the TsT User Guide (Lancer PN: 28-0975) and Operation Manual (Lancer PN:
28-0945/02) located on the Lancer website (lancercorp.com) or by the QR code at the beginning of this Installation Guide.
NOTE
Sold-Out Feature
1. From the Service Menu, press the
Sold Out
button.
2. Manually adjust specific brands to read
Ready, Out,
or
Auto
.
Ready - signifies there is available product and the
valve will dispense when activated
Out - signifies there is no available product or there is a
problem with the specified brand and will not dispense
when activated.
Auto - signifies that the configured Sold Out Sensor
controls whether the brand can be dispensed. This
feature requires an optional sold out sensor kit, which
does not come standard, and is available for up to
ten (10) brands at one time. If no sold out sensor is
assigned then the Auto feature acts the same as the
Ready feature.
NOTE