25
IP ADDRESS TABLE
Address
Pair
Frame Dipswitch
Setting
Frame IP address
Panel IP address
0
10.30.1.80
10.30.1.81
1
10.30.1.82
10.30.1.83
2
172.30.1.80
172.30.1.81
3
172.30.1.82
172.30.1.83
4
192.168.1.80
192.168.1.81
5
192.168.1.82
192.168.1.83
6
192.168.1.180
192.168.1.181
7
192.168.1.182
192.168.1.183
The subnet mask is set to 255.255.255.0 in every case.
Important Note:
The settings of the first three sections of the dipswitch on the panel
(near the Ethernet connector) and the first three sections of the switch on the rear of
the frame must match for the panel and frame to communicate.
Multiple TDC-100Bs may communicate over the same network so long as they use
different IP addresses.
OTHER DIPSWITCH FUNCTIONS
The 8-position DIP Switch on the rear of the rack-mount frame has some other
functions beyond the IP selection above. The functions of these switches are
described below.
Sw 1 – 3 IP Adressing, as described above
Sw 4 - not used
Sw 5 – Inhibits the ‘No Reference’ display if on.
Sw 6 - Inhibits the ‘Clear All Register’ function if on.
Sw 7 – not used
Sw 8 – Sets menu defaults after ‘Clear All Reg’ if on.
Содержание TDC-100B
Страница 28: ...28 Notes...
