Lancaster 7-LXDAN-1B, Инструкция по установке, эксплуатации и обслуживанию

Страница: 6 / 40

PAGE 6
WATER
PRESSURE
TANK
BYPASS PLUMBING
RECOMMENDED
IF
BP2000
BYPASS VALVE
IS NOT USED.
FROM
WELL PUMP
MINIMUM 10 FEET OF PIPE
BETWEEN
WATER FILTER OUTLET
AND
WATER HEATER INLET
WATER
BYPASS PLUMBING
RECOMMENDED
IF
BP2000
BYPASS VALVE
IS NOT USED.
TO
DRAIN
TO
OUTSIDE
TAP
WATER
HEATER
DRAIN LINE
AIR GAP
ADAPTER
FROM
WATER MAIN
COLD
HOT
MINIMUM 10 FEET OF PIPE
BETWEEN
WATER FILTER OUTLET
AND
WATER HEATER INLET
WELL WATER
INSTALLATION
CITY WATER
INSTALLATION
WATER
METER
TO
DRAIN
TO
OUTSIDE
TAP
WATER
HEATER
DRAIN LINE
AIR GAP
ADAPTER
COLD
HOT
LOCATE WATER FILTER CLOSE TO A DRAIN.
AVOID OVERHEAD DRAIN LINES IF POSSIBLE TO
PREVENT BACK PRESSURE ON THE SYSTEM.
IF OVERHEAD DRAIN LINE IS USED AND EXCEEDS
5 FEET ABOVE CONNECTION ON CONTROL VALVE
OR
IF DRAIN LINE EXCEEDS 20 FEET IN LENGTH,
DRAIN LINE PIPE SIZE SHOULD BE MINIMUM 3/4".
LOCATE WATER FILTER CLOSE TO A DRAIN.
AVOID OVERHEAD DRAIN LINES IF POSSIBLE TO
PREVENT BACK PRESSURE ON THE SYSTEM.
IF OVERHEAD DRAIN LINE IS USED AND EXCEEDS
5 FEET ABOVE CONNECTION ON CONTROL VALVE
OR
IF DRAIN LINE EXCEEDS 20 FEET IN LENGTH,
DRAIN LINE PIPE SIZE SHOULD BE MINIMUM 3/4".
OR BACKWASH RATES EXCEED 5.3 GPM,
OR BACKWASH RATES EXCEED 5.3 GPM,
ENLARGED WATER FILTER
BP2000 BYPASS VALVE
SUPPLIED WITH FILTER
V3007 STANDARD
FITTING ASSEMBLY
SUPPLIED WITH FILTER
(OPTIONAL FITTING
ASSEMBLIES AVAILABLE)
ENLARGED WATER FILTER
BP2000 BYPASS VALVE
SUPPLIED WITH FILTER
V3007 STANDARD
FITTING ASSEMBLY
SUPPLIED WITH FILTER
(OPTIONAL FITTING
ASSEMBLIES AVAILABLE)
THERMAL EXPANSION
TANK MIGHT BE
REQUIRED
THERMAL EXPANSION
TANK MIGHT BE
REQUIRED
FILTER
FILTER
SIDE VIEW
SIDE VIEW
PLUG
PLUG
DRAIN LINE FITTING
CONNECTION
DRAIN LINE FITTING
CONNECTION
IN OUT
IN OUT
7-LXCT, 7-LXDAN, 7-LXIM, 7-LXST INSTALLATION