Lancaster 7-LXDAN-1B, Инструкция по установке, эксплуатации и обслуживанию

Страница: 14 / 40

PAGE 14
STEP 4
STEP 4 – Next Regeneration Time (minutes): Set the minutes of day for backwash using
or buttons. Press
NEXT
to return to normal operation. Press
REGEN
to return to previous
step.
RETURN TO NORMAL MODE
ADJUST DAYS BETWEEN BACKWASH,
OR TIME OF BACKWASH
STEP 1
STEP 2
STEP 1
- Press
NEXT
and simultaneously for 3 seconds to access Installer Display Settings.
STEP 2 – Day Override: Set the maximum number of days between backwashes (REGEN). If
value set to “OFF”, backwash initiation is based solely on volume used. If value is set as a number
(allowable range from 1 to 28) a backwash initiation will be called for on that day even if sufficient
volume of water were not used to call for a backwash. Set Day Override using or buttons:
• number of days between backwash (1 to 28); or
• “OFF”.
For 7-LXCTAIR, 7-LXIMAIR, 7-LXKATAIR and 7-LXKATAIRO3 models ,
STEP 2 Day Override is strongly recommended - to be set at 1 for daily backwashing in order
to replace the head of air or ozone inside the filter tank.
Press
NEXT
to go to step 3. Press
REGEN
to return to previous step.
STEP 3 – Next Regeneration Time (hour): Set the hour of day for backwash using or
buttons. AM/PM toggles after 12. The default time is 12:00 AM (midnight). Press
NEXT
to go to
Step 4. Press
REGEN
to return to previous step.
STEP 3