Lancaster 7-LXDAN-1B, Инструкция по установке, эксплуатации и обслуживанию

Страница: 19 / 40

PAGE 19
X-FACTOR FRONT COVER AND DRIVE ASSEMBLY
Drawing No. Order No. Description Quantity
1 V3692-02LW LP Front Cover Assembly 1
2 V3107-01 Motor 1
3 V3106-01
Drive Bracket, Spring Clip, Drive Gear 12x36 and
Drive Gear Cover
1
4 V3757LP PC Board 1
After completing any valve maintenance involving the drive assembly or the drive cap assembly and pistons, unplug
power source jack from the printed circuit board (black wire) and plug back in or press and hold
NEXT
and
REGEN
buttons
for 3 seconds. This resets the electronics and establishes the service piston position. The display should flash the
software version and then reset the valve to the service position.
AC Adapter
Order No.
(Not shown)
V3186
Supply Voltage 120V AC
Supply Frequency 60 Hz
Input Current 0.35 A
Output Voltage 15V DC
Output Current 0.5 A
No user serviceable parts are
on the PC board, the motor, or
the power adapter. The means
of disconnection from the main
power supply is by unplugging
the power adapter from the wall.
Battery Fully Seated
When replacing the battery, align
positives and push down to fully seat.
Battery replacement is
3 volt lithium coin cell
type 2032.
Correct
Battery
Orientation
1
2
3
4