LaMotte CON 6 PLUS, Руководство пользователя

Страница: 11 / 36

11
2.8 Switching the Meter On
Press ON/OFF to power up the meter. The meter will cycle through
various setup parameters when switched on.
1. The fi rst screen will show the model [Con6] [tdS6].
2. The second screen will show the nominal cell constant value.
The CON 6 PLUS and TDS 6 PLUS meters can accept
electrodes with k = 0.1, 1.0 or 10.0 nominal cell constants.
Default value is k = 1.0 [ C 1.0 ].
See Section 5.2 Advanced Setup to modify.
3. The third screen will show the Normalization Temperature which
can be set to 25 °C or 20 °C. The default value is 25 °C [ t 25.0 °C ].
See Section 5.6 Advanced Setup to modify.
4. The fourth screen will show the Temperature Coe ffi cient which
can be set from 0.0 to 3.0 % per °C. Default value is 2.1 %/°C
[ t 2.1% ].
See Section 5.5 Advanced Setup to modify.
5. All LCD segments will light for 2 seconds before entering the
measurement mode. Note: The meter will use the measurement
mode that was in use when it was powered o ff .
CON 6 PLUS
Measurement Mode
m S
μ
C °
%
pptmV
pH % MIN MAX LO HO
F
C ° °
m S
μ
S
μ
ON
OFF