LaMotte CON 6 PLUS, Руководство пользователя

Страница: 10 / 36

10
1. DO NOT perform
calibrations or
measurements without the
protective probe guard in
place.
2. Immersion above the
protective guard is not
recommended. The cable
can be submerged brie fl y
but is not designed for
continuous immersion.
See “ Probe Care and Maintenance ”
for more information.
2.7 Connecting the Probe
1. To connect the probe, align the connector slots with the posts of
the meter socket and rotate the connector clockwise until it locks.
2. To remove the probe, rotate the connector in anti-clockwise
direction until it unlocks, and slide the connector o ff the socket.
3. Insert the mini phono jack of the temperature sensor into the
socket on the meter as shown below.
2.5 mm mini phono
jack for
temperature sensor
BNC
connector for
probe