FL D LN C
17
EN
cod. 3541P831 - Rev. 00 - 02/2021
EN
1. GENERAL WARNINGS
• Carefully read and follow the instructions con-
tained in this instruction booklet.
• After boiler installation, inform the user regarding
its operation and give him this manual, which is
an integral and essential part of the product and
must be kept with care for future reference.
• Installation and maintenance must be carried out
by professionally qualified personnel, in compli-
ance with the current regulations and according
to the manufacturer's instructions. Do not carry
out any operation on the sealed control parts.
• Incorrect installation or inadequate maintenance
can result in damage or injury. The Manufacturer
declines any liability for damage due to errors in
installation and use, or failure to follow the in-
structions.
• Before carrying out any cleaning or maintenance
operation, disconnect the unit from the electrical
power supply using the switch and/or the special
cut-off devices.
• In case of a fault and/or poor operation, deacti-
vate the unit and do not try to repair it or directly
intervene. Contact professionally qualified per-
sonnel. Any repair/replacement of the products
must only be carried out by qualified personnel
using original replacement parts. Failure to com-
ply with the above could affect the safety of the
unit.
• This unit must only be used for its intended pur-
pose. Any other use is deemed improper and
therefore hazardous.
• The packing materials are potentially hazardous
and must not be left within the reach of children.
• The unit must not be used by people (including
children) with limited physical, sensory or mental
abilities or without experience and knowledge of
it, unless instructed or supervised in its use by
someone responsible for their safety.
• The unit and its accessories must be appropri-
ately disposed of, in compliance with the current
regulations.
• The images given in this manual are a simplified
representation of the product. In this representa-
tion there may be slight and insignificant differ-
ences with respect to the product supplied.
THE CE MARKING CERTIFIES THAT THE PROD-
UCTS MEET THE ESSENTIAL REQUIREMENTS OF
THE RELEVANT DIRECTIVES IN FORCE.
THE DECLARATION OF CONFORMITY MAY BE
REQUESTED FROM THE MANUFACTURER.
