lamber PRL-C, Инструкция по эксплуатации

Страница: 11 / 30

11
PRL-C
First Section - FOR THE USER
The compact independent pre-wash unit allows to replace the hand prewashing usually carried out on
the dirty dishes.
Two strainer drawers with a high capacity allow to collect the dirt present on the dishes.
These strainer drawers can be cleaned without completely stopping the ongoing washing cycle.
OPERATION BEFORE WORKING
Make sure that :
- the wall-mounted on/off switch is
switched on;
- the water and steam* cocks are open;
-
water and steam (*) are present in the
system;
- the filters are in their housings
- Check that the detergent and rinse aid
containers are not empty.
CAUTION : Observe the safety notes and
dosage data for the use of chemicals. During the
use of the chemical substance wear protective
clothing, gloves and protective glasses. Do not
mix different cleaning products.
- Tank’s and suction pump’s filters are in
their correct housing (see page 10 filters F1
F2,F3 and F4)
-
The courtains are in the correct position.
- The courtains must have the shorter side
facing the baskets entry, (see the blue
warning stickers placed on the doors)
-
- The inspection door must be properly
closed
- Please pay attention to the opening and
closing of the door of the Dishwasher. Do not
use the machine if you are wearing
clothes/items that could get entangles in the
dishwasher parts. As they can limit
personnel’s regular moving ability!
- Check that the frontal strainer drawer is
properly placed and closed in its housing.
- The sizes of the dishes to wash have not to
be larger than the working washing sizes
-
-
max width 500mm,
- max height 420 mm ;