lamber PRL-C, Инструкция по эксплуатации

Страница: 15 / 30

15
AFTER WASHING OPERATIONS
PRECAUTION AND CLEANING
INSTRUCTIONS
Attention. Before carrying out cleaning the inside
of the machine, make sure that there are no foreign
objects that could damage the rusty steel inside the tank.
The eventual rust particles could come from non-
stainless steel dishes, from baskets or damaged water
pipes not rust-proof.
- high temperatures can be reached inside
the machine (90°C). Affter power supply
has been removed, wait until the machine
has reached the room temperature,
before working on it;
- never leave tools, parts or other loose
material on or in the machine;
- BEFORE starting machine or cycle, after
any maintenance or repair work, make
sure all protective are correctly installed;
At the end of the working operations:
ATTENTION!
Drain only for a unit directly connected
to the machine!
1 – Press the red EMERGENCY STOP
pushbutton placed on the side panel.
Tank drain by drain valve
It is necessary to push the button “D” at the
end of the working process for 3 seconds:
-The LED will flash and on the information
display you will read “TANK DRAIN” (attention!
The “A” button has to be on switch-off position).
-After two minutes the drain stops
automatically.
2 - IMPORTANT: Before carrying out
cleaning and maintenance operations
disconnect the machine from the power
supply source by means of the wall-
mounted switch or by means of the
disconnecting switch located on the control
panel.
ATTENTION!
Drain only for independent unit!
At the end of the daily operations carry out the
drain by turning the Selector switch “A” in
position “drain” (lamp “D” lighted on)
At the end of the drain turn the selector switch
in position OFF.
Then:
3 – Lift the inspection door making sure that it’s
properly locked to the appropriate support.
4 - Check if the wash nozzles are not
clogged. If it’s necessary to disassemble them,
pay attention then to reassemble them properly
(twice a week).
Upper wash
Lower wash