LaCie 5big Backup Server
Setting Up Your LaCie 5big Backup Server
Configuration Guide
page 13
2.1. Turning On the 5big Backup
Server
The power supply kit is composed of two cables: one cable (
A
) con-
nects to the LaCie 5big Backup Server; and the other cable (
B
) con-
nects to a power outlet, such as a wall outlet or a surge protector
(
Fig. 06
).
1. Connect Cable
A
to the 5big Backup Server.
2. Connect Cable
B
to the power supply brick (
C
).
3. Connect Cable
B
to a surge protector or wall outlet.
4. Turn on the server by pushing the button on the face of the 5big
Backup Server. (See
1.4.1. Front View
)
5. The 5big Backup Server is powered and ready for use when the
front LED stops blinking.
IMPORTANT INFO:
The 5big Backup Server may take a few min-
utes to boot the first time it is turned on.
CAUTION:
Only use the AC adapter supplied with your specific La-
Cie device. Since each product is unique, do not substitute a power
supply from another LaCie device or another manufacturer for the
LaCie 5big Backup Server.
Please note that the AC adapter provided with your LaCie device in-
cludes connectors for electrical outlets in multiple regions. Thanks to
its 100-240 Volt power supply, you may use your device in a foreign
country. However, LaCie accepts no responsibility for any damage
to the drive resulting from the use of an inappropriate adapter. Fur-
ther, your warranty will be void if you:
✦
Use a power cable, power supply, or power adapter other
than one that has been authorized by LaCie.
✦
Do note remove your AC adapter when transporting your
LaCie device. Neglecting to do so may damage your 5big
Backup Server.
DESIGNED BY NEIL POULTON
POWER
AUDIO OUT
LAN 1
USB
USB
USB
eSATA
Fig. 06
