LaCie d2 SAFE Hard Drive
User Manual
page
Frequently Asked Questions
Question
■
Answer
■
Do I need to install software on every
machine that I want to connect to the
d2 SAFE drive?
No, the d2 SAFE drive does not require any special software to run. Just
connect the d2 SAFE drive to the computer following the instructions in
chapter
4. Connecting Your LaCie d2 SAFE Drive
and authorized users can
swipe their fingers over the sensor to access the drive.
Can users change their profiles or re-
move other users?
No, because only users with Administration privileges have access to the User
Administration required for adding and removing users and changing user
profiles.
Are my fingerprints stored on the d2
SAFE drive?
The data for recognizing fingerprints is encrypted and stored locally on the
drive. There is no way this data can become corrupted or be copied.
Can I open the case on the d2 SAFE
drive?
If you remove the d2 SAFE drive from its case, you will void the product
warranty.
What is the probability that a finger-
print from an unauthorized user can
unlock the d2 SAFE drive?
It’s very unlikely that this would happen. First, the biometry technology used
is very safe and reliable. Second, each human has his own biological identity.
Third, LaCie has selected a sensor for the d2 SAFE drive that is known for
it’s reliability and quality. The image quality specification is really rigorous so
it increases the reliability of the d2 SAFE drive.
What happens if the fingerprint sensor
is damaged?
Just return the d2 SAFE drive to the factory and use the data from one of
your backups in the meantime. (You did do a backup, right?) Please contact
LaCie Customer Support.
What happens if the Administrator is
not available?
LaCie highly recommends giving at least two people Administration privi-
leges in case one person leaves the company or is not available. LaCie does
not take responsibility should no Administrator be available to access the
data on your drive.
Can the d2 SAFE drive be used on a
network?
No, the LaCie d2 SAFE drive can only be used via USB, Hi-Speed USB 2.0
or USB 1.0.
What is the LED for?
The LED is:
On (solid) when the drive is in configuration mode.
Off when the drive is in normal operation mode, either locked or un-
locked.
Blinking when ready for sensor input – a finger can be swiped.
❖
❖
❖
