U
se:
The traditional heating plate is coated with a black enamel coating. No maintenance is necessary.
Turn gas supply on.
Rotate burner valve handle to lighting position “
IGN
”.
Depress handle and turn burner valve handle to full position to shut down
burner.
Rotate burner valve handle to “
OFF
” position.
A reduced flowrate position identified by the “
LOW
” mark produces the
preset minimum burner power.
C
leaning the heating plate:
Immediately remove any spillages to make cleaning easier. Use dish soap and water with a sponge to clean.
You may use commercially available special products for cleaning cast iron.
If the cast iron is heavily soiled, use a solution of 50% white vinegar and 50% warm water with a scouring pad or nylon
brush to remove grease before cleaning. Increase the concentration of vinegar for stubborn grease stains. Rinse with
water and towel dry after cleaning.
Page 29 of 38 – US – Date: 26/02/10
DO NOT USE WATER TO CLEAN THE HEATING PLATE
WHEN IT IS HOT.
This can damage it.
