U
se
:
Turn on main gas supply to range.
Depress handle & rotate burner valve handle anti-clockwise to “IGN”
position.
Depress handle fully and wait for the burner’s thermocouple to heat up.
Hold for 15-20 seconds
after flame has lit
. Igniters will spark (click)
while handle is depressed.
Release handle and rotate burner valve handle to “HIGH” position.
Depress & rotate burner valve handle to the “LOW” position.
To rotate burner valve handle to “Off” position, slightly depress handle
then move into “Off” position.
A reduced flowrate position identified by the “Low” mark produces the preset
minimum burner power. This setting is adjustable behind the knob.
U
seful hint:
Always choose a burner that matches the diameter of the utensil used.
C
leaning the cooktop:
The burners are made in two parts in order to facilitate cleaning. Clean them separately.
After removing the grates and burners, the cooking surface can be cleaned easily and thoroughly by simply using a
sponge and soapy water.
Do not use scouring pads or abrasive products such as oven cleaners and stain removers.
Use a designated stainless steel polish & cleaner to clean the cooktop (brands like: Simple Green & ZEP’S).
When cleaning, be careful not to splash liquid into the openings of the burners.
Page 27 of 38 – US – Date: 26/02/10
CAUTION
:
During use of the cooking surface or
oven, accessible parts may become
very hot during use. Warn users of the
potential hazards.
CLOSE THE MAINS GAS VALVE
BEFORE CLEANING
