Lacanche RULLY, Руководство по установке

Страница: 12 / 38

In case of use with a gas other than that for which the
appliance was initially set up, it is crucial to replace the
orifices and modify the adjustments as defined below.
TOP BURNERS:
Orifice:
Lift the air ring E . Replace the injectors F (Fig. 19) in
accordance with Table 3 (Ø in 1/100 mm).
The side burner bodies are kept in place by a transversal bar
( H , fig. 21). In order to take them out, unscrew screws I
(fig. 22) then G (fig. 20).
Note : When one or more nozzles are changed, the sealing
ring should be changed as well (see gas circuit diagram).
Adjustment of primary air:
Refit the burner bodies and burner caps in their respective
recesses, adjust the air ring
F (Fig. 19) of the burner in accordance
with Table 4 .
Note : Normal flames are bluish violet except for natural gas
flames which are pale blue.
Wrench 12mm
( 15 /
32
)
Fig. 19
F
E
Allen 3mm ( 1 /
8
)
Fig. 20
G
Page 12 of 38 – US – Date: 26/02/10
I
Fig. 22
Hex 7mm ( 9 /
32
)
H
Fig. 21
Table 4 Table 4 Table 4 Table 4 Table 4 Table 4
Burners Burners SF F I UF/T
GAS Pressure Opening in mm/inches Opening in mm/inches Opening in mm/inches Opening in mm/inches
Natural gas 6" WC 1.5/
1/16
6/
1/4
max 13/
1/2
L.P. propane 10" WC 3/
1/8
max max max
Table 3 Table 3 Table 3 Table 3 Table 3 Table 3
Burners Burners SF F I UF/T
GAS Pressure Ø Ø Ø Ø
Natural gas 6" WC 0.90 1.30 1.45 1.70
L.P. propane 10" WC 0.65 0.90 1.05 1.20