LabSmith HVS448, Руководство пользователя

Страница: 42 / 48

42
APPENDIX 1. MENUS AND TOOLBARS
Menu Functions
The File menu lets you open, close and save sequence files (.seq files). You can also choose the Trace Measurements option,
which lets you record voltage and current for each channel, over time, to an external file.
The
Edit Menu
lets you cut, copy and paste text as you edit your sequence.
The View menu lets you set up the Sequence interface:
-
Toolbar displays or hides Sequence’s tool bars.
-
Status
displays or hides the status bar at the bottom of the Sequence window.
-
Split lets you resize the two panes of the Sequence window.
-
Options > Communications lets you set up communications with the HVS448.
-
Options
>
Monitoring
lets you choose options for monitoring HVS functions.
-
Options>HVS448 Model lets you pick the HVS448 Model number for the unit you are controlling.
-
Options>Show All Dialogs turns on all dialog boxes so they will all appear.
-
Options>Active Voltage Control is the default that shows current and voltage of all channels and lets you change
current and voltage by dragging.
The Actions menu controls communication with the HVS448 as well as the progress of the current sequence.
-
Enable High Voltage applies high voltage to the channels.
-
Disable High Voltage stops high voltage from being applied even when a voltage is set for a channel.
-
Program All sends the current settings and sequence to the HVS448.
-
Run lets you start the current sequence at any of its steps, A–H.
-
Pause
halts progress of the current sequence. All channel states remain as they are. This is equivalent to the
Pause/Resume button on the HVS448 front panel.
-
Resume restarts progress of the current sequence. This is equivalent to the Pause/Resume button on the HVS448 front
panel when the sequence is paused.
-
Reset / Stop ends the current sequence and sets all channels to inputs.
-
Update Firmware lets you update the firmware in the HVS448 as new features become available.
-
Get Versions reports the current versions of firmware and software.
-
Calibration>Recalibrate
performs a series of internal calculations to calibrate the voltage settings. While the HVS is
performing this function, the high voltage channels are supplying up to the maximum voltage to the back-panel high
voltage connectors.
Be sure to disconnect everything from the high voltage connectors on the back panel before
performing a calibration . Following recalibration, the channels are inputs until they receive new settings.
-
Calibration >Save Calibration saves the calibration results to the HVS.
-
Calibration> Restore Calibration resets the HVS448 to a saved calibration.
Lock Front Panel prevents accidental or purposeful adjustment of sequences or voltages from the front panel. When the panel is
locked, the LED next to the power button glows a steady red and all buttons are dark.
Unlock Front Panel allows front panel control of the HVS448. This is the default condition. When the panel is unlocked, the
power LED glows green and the front panel buttons are illuminated.
The Lock functions are nonvolatile: the panel will remain locked or unlocked even if power is removed and restored. The panel
can only be unlocked from within Sequence software.