Label I Feed Good L, Техническое руководство

Страница: 79 / 132

i • FeedGood
L
• Technical Guide | 77
4-­20mA Analogue Output
This is for setting the operating parameters of the "4-­20mA
Analogue Output" option.
If the scale is supplied with the “4-­20mA Analogue Output” option,
on the Weighing it gives an analogue signal proportional to the
Total Weigh on the
4-­20mA connector.
Note : the Preference is only displayed if the scale is supplied with
the "4-­20mA Analogue Output" option.
Note : when the scale is supplied with the "4-­20mA Analogue
Output" option, the maximum power supply of the scale must be
limited to 30Vdc.
Note : for more information refer to the documentation attached to
the “4-­20mA Analogue Output” option or contact the Customer
Service.
Display: 4-­20mA
Options:
•
4-­20mA F.S.: 100 … 99,999 kg/lb ( 1,000 ).
•
HYSTERESIS: -­1,000 … 0 .
Welcome Message
This is to program the message you want to display at Power On.
The message must have a maximum of 2 rows with 20
alphanumerical characters each.
Display: WELCOME MESS.
Default: LABEL ADVANCED SOLUTIONS
Buzzer
This is to enable operation of the buzzer when you press a key or
during Weighing to indicate that the Prealarm Threshold has been
reached or any alarms.
Display: BUZZER
Options:
•
KEYPAD: No , Yes.
•
WEIGHING: No , Yes.