Label I Feed Good L, Техническое руководство

Страница: 67 / 132

i • FeedGood
L
• Technical Guide | 65
Weighing Preferences
Use Weighing Preferences to customise the weighing operation.
Note : the default value of the Preference is highlighted in “bold”.
Note : default Administrator Password is “ 035 ”.
1. To access the Weighing Preferences, select the item
“WEIGHING PREFERENCES”, then press
u . The display
shows “ WT ” and the list of Weighing Preferences.
2. Select the Preference you want to program, then press
u
.
Weight Unit
This is for choosing the Weight Unit with which you want to
display/store/print the weight.
Note : changing the Weight Unit from kilogram to pound and vice
versa, the scale recalculates the Calibration, Maximum Load and
Maximum Weight Loaded values.
Display: WEIGHT UNIT
Options:
kg , lb.
Display Update
This is for choosing the time interval with which in Weighing you
want to refresh the weight on the display.
Display: DISPLAY UPDATE
Options: 200ms,
400ms , 600ms, 800ms, 1s.
Display Resolution
This is for choosing the Resolution with which in Weighing you
want to display the weight.
•
If you program "Auto 5-­1", in Recipes Execution and in
Target Weighing, the Resolution changes automatically
from 5 to 1 in the last 50 points to weigh, while in Manual
Weighing, it remains at 5.
•
If you program "Auto 5-­2", in Recipes Execution and in
Target Weighing, the Resolution changes automatically
from 5 to 2 in the last 50 points to weigh, while in Manual
Weighing, it remains at 5.
Display: RESOLUTION
Options: 1, 2, 5, 10, 20, 50, 100,
Auto 5-­1 , Auto 5-­2.