Label I Feed Good L, Техническое руководство

Страница: 75 / 132

i • FeedGood
L
• Technical Guide | 73
If the Preference is set at "Operator Management" and at least
one Operator is stored in the Operators File with the programmed
Password, at Power On the scale asks to enter a Password to
continue. During operation the current Operator can be changed
by pressing
ID .
•
Operators with “ADMIN” Privileges have complete control
of the scale.
•
Operators with “POWER USER” Privileges cannot modify
or execute the Settings (except General Backup), create or
modify Operators.
•
"USER" Operators cannot modify or execute Settings,
create or modify Archives, create Recipes, modify and
execute the Recipes of another Operator, execute Data
Transfer.
•
“NOBODY” Operators can only execute the Recipes which
have themselves as Operator.
•
Recipes which have not programmed an Operator or
which programmed an Operator without the Password, can
be modified or executed by all Operators regardless of the
set Privilege.
•
When you try to execute a command or a procedure
without the Privileges necessary, the display shows the
message “Protection enabled. Enter the Password or
press ESC to exit.”. The Password to be entered is the one
programmed in the “Administrator Password” Preference.
Display: SCALE PROTECT
Options: None,
Settings , Settings and Data,
Operator Management.
Administrator Password
This is to program the Administrator Password which allows you
to use all the functions of the scale when the "Scale Protect"
System Preference is enabled.
Display: ADMIN PASSWORD
Default:
035 .