Laars OMNITHERM ONH1250, Инструкции по сборке, установке и эксплуатации

Страница: 77 / 136

Page 77
8.D.11.a Demands Priorities
To navigate to the Demands Priorities Screen, first go to the Miscellaneous folder.
At the Demands Priorities screen select each configured demand and assign a priority number.
8.D.11.b
Anti-Short Cycle
To navigate to the Anti-Short Cycle Configuration Screen, touch the Miscellaneous Features Icon on the Configuration
Screen, then touch the Anti-Short Cycle Icon on the Miscellaneous Features screen.
The Anti-Short Cycle Configuration Screen allows adjustment of the following parameter:
• Cycle Time –
The amount of time after a heat demand is satisfied that the unit will wait to initiate the next active heat
demand.
C O N F I G U R AT I O N
NOTE: Demands Priorities is only active on the lag or stand alone boilers.
NOTE: Anti-Short Cycle Time does not apply to DHW/DHW3 heat demands.
Remember to always save the new setting with the button.
Remember to always save the new setting with the button.
The
O
MNI
T
HERM