La Marzocco vulcano swift, Инструкция по эксплуатации

Страница: 6 / 74

8. Operation of the appliance
PRELIMINARIES
HOPPER
HOPPER
FIXING PIN
OPEN
Make sure the hopper is positioned
correctly on the appliance and fixed to
the casing with relevant pins.
Close the locking slide and fill the
hopper with coffee beans. Open the
locking slide so that the beans are
allowed to drop into the grinding system.
SWITCHING THE APPLIANCE ON AND OFF
START PUSH BUTTON
In order to power up the appliance, turn
the on-off switch knob to I.
Engage the filter holder directly to the
appliance (apply only a light amount of
torque; if the grinder shifts on the
counter top, you are using too much
force).
Once the filter holder is engaged, start
the grinding in this way: push the start
button to grind, dispense and tamper a
double dose.
The red indicator lights located above
the start button is illuminated when the
appliance is grinding and tamping.
When the volume of ground coffee in
the filter holder reaches the set level,
the grinding motor turns off. The
tamping motor continues to run for a
few seconds, “polishing” the tamped
coffee.
Once the red light is no longer illumin-
ated, you may remove the filter holder
from the grinder and engage it into the
espresso machine.
If when you push the start button the
red indicator lights will flash, is occur-
ring at least one of the following condi-
tions:
•
You attempted to start the process with
a full filter holder.
•
The safety timer has run out due to an
empty bean hopper, a closed locking
slide, or a plugged bean hopper chute.
•
There is no filter holder engaged in the
appliance.
5
EN